FORD P100- l

1982-1987

Model of the engine LCT
Ob"em/chislo of the cylinders 1593/4
Degree of szhatiya/kompressiya, bars (lbf/in2) 9.2/10.8 (157)
Oil pressure at the idling [ on the increased revolutions ], bar (lbf/in2) [ 2.4 (35) ]
Temperature of oil, °.Ch 80
Clearances in admission valves, mm (in) 0.20 (0.008)
Clearances in release valves, mm (in) 0.25 (0.010)
Firing order 1-3-4-2
Location of the 1st cylinder Timing belt end
Cooling system
Temperature of the opening of the valve of thermostat, °.Ch 88
Pressure of the wear and tear of the valve of the plug of radiator, bars (lbf/in2) 0.9 (13)
The fuel system
Revolutions of idling - installed by hand [ automatically controlled ], r/min 800±2shch
Accelerated revolutions of idling installed by hand [ automatically controlled ], r/min -
Content SO in the exhaust gases - at the idling [ with 3000 r/min ], % y.shch±0.shch
Content SN in the exhaust gases - at the idling [ with 3000 r/min ], % -
Content WITH2 in the exhaust gases - at the idling [ with 3000 r/min ], % -
Carburetor [ the system of injection ] Ford
Type of the device THE VV
Main zhikler/raspylitel' -
Pressure of fuel, bars (lbf/in2) 0.28-0.36 (4.0-5.0)
Octane number of gasoline, RON 98 [ UL Refer to mfr ]
Ignition system
Type Contact Breaker
Coil -
Resistance of primary winding, Ohm -
Additional resistance, Ohm -
Stress is "contact 15(+) - the earth" -
Distributor Motorcraft
Clearance between the contacts [ air gap ], mm (in) 0.56-0.71 (0.022-0.028)
Angle of the closing of contacts of interrupter, ° (%) 48-52
Capacity of capacitor, F -
Direction of rotation of the sulky -
Firing point - initial [ stationary ], (° to VMT - r/min) 12 btdc @ idle
Presence of the vacuum regulator -
Common ignition advance, (° to VMT - r/min) -
-
-
Given for checking the centrifugal governor, (° to VMT - r/min) 0 @ 1000
-
26-33 @ 5200
Given for checking of vacuum regulator, mbars (in Hg) 80-453 (2.4-13.4)
The fully advanced ignition, ° 14...22
Stamp of sparkplugs Motorcraft/Champion
Type BF22/F7YC
Clearance between electrodes, mm (in) 0.60 (0.025)
Electrical system
Battery (napryazheniye/tok otdachi/emkost') 12/175/60
Voltage of the generator with complete nagruzke/oboroty 13.7-14.6 @ 3000
Starter. Current with maximum that turning momente/padeniye of the stress -
Load test -
Brake system
Minimum thickness of front cover plates, mm (in) -
Minimum thickness of rear cover plates, mm (in) -
Tires
Size of casings for the model with the body sedan -
For the models with the bodies: universal/furgon 185x14
Pressure in the the perednikh/zadnikh, sedan, bar (lbf/in2) -
For the models with the bodies: universal/furgon, bar (lbf/in2) 2.5/2.5 (36/36)
Front of podveska/ugly of the installation of the wheels
Disintegration (-)/convergence (+), mm (in) [ ° ] -y.0±y.0 [ - 0.0ya±0.0ya ]
Angle of the longitudinal inclination of axis of rotation -shche'±yashch '
Angle of the transverse inclination of axis of rotation +2°
Transverse inclination of the axis of rotation of the wheel -
Rear of podveska/ugly of the installation of the wheels
Disintegration (-)/convergence (+), mm (in) [ ° ] -
Angle of the longitudinal inclination of axis of rotation -
Moments of the delay
Cylinder head - first stage, nm (lbf ft) Splined: 40-55 (30-41) 1
Cylinder head - second stage, nm (lbf ft) Splined: 50-70 (37-52) 2
Cylinder head - third stage, nm (lbf ft) Splined: 73-83 (54-61) 3
Cylinder head - fourth stage, nm (lbf ft) Splined: 95-115 (70-85) 4
Covers of connecting rod bearings, nm (lbf ft) 40-47 (30-35)
Crankshaft bearing caps, nm (lbf ft) 88-102 (65-75)
Bolts Of cohesion, Nm (lbf ft) 17-21 (13-15)
Flywheel [ the leading disk ], nm (lbf ft) 64-70 (47-52)
Nut of the boss of front wheel, nm (lbf ft) RWM
Nut of the boss of rear wheel, nm (lbf ft) -
Gayki/bolty of wheels, nm (lbf ft) 100 (74)
Sparkplugs, Nm (lbf ft) 20-28 (15-21)
Servicing capacities
Engine and filter, liter (pints) 3.75 (6.6)
Mechanical gearbox 4- SK [ 5- SK ], liter (pints) 0.9 (1.6)
Automatic gearbox, liter (pints) -
Reducer (main drive), liter (pints) 1.3 (2.3)
Cooling system, liter (pints) 7.0 (12.3)
Fuel tank, liter (gallons) 68 (15.0)

1 bolts with the internal '-grannym slit: 35-40 (26-30)
2 bolts with the internal '-grannym slit: 70-75 (52-55)
3 bolts with the internal '-grannym slit: After 5 min +90°

1: the revolutions of idling by 2: SO/kachestvo of the mixture